Starlink Mini Magnetic 30V Booster Mount

Plug‑and‑Play 30V Booster Mount

Key Features

• All‑in‑one mount and power solution
  Secure Starlink Mini mounting combined with an integrated 12V booster for a cleaner, more compact install.
• 12V input → 30V output
  Booster converts standard 12V DC input from your battery or vehicle into a stable 30V output tailored for Starlink Mini operation.
• Anderson plug connector
  Uses a genuine Anderson‑style connector for quick, reliable connection to your existing 12V system, common across caravans, canopies and off‑road setups.
• Durable, outdoor‑ready materials
  Built from heavy duty steel and stainless-steel components, chosen for long‑term outdoor use in harsh Australian conditions.
• Low‑profile, roof‑rack friendly design
  Designed to sit neatly on roof tops, canopies or flat mounting trays, keeping your setup tidy and aerodynamic.
• Plug‑and‑play installation
  Simple mounting and Anderson connection with no complex wiring or soldering, ideal for DIY installs.

Specifications

• Compatibility: Starlink Mini dish only
• Power Input: 12V DC via Anderson‑style plug (typical 12V battery/vehicle systems)
• Power Output: 30V DC regulated (designed for Starlink Mini operating voltage)
• Booster Type: DC‑DC voltage booster / step‑up converter for Starlink Mini
• Mount Material: Heavy‑duty steel construction
• Protection: IP67‑style water and dust‑resistant 30v power booster module
• Typical Use Cases: Vehicle roof, canopies, caravans, campers, vans, 4WDs, marine and off‑grid installations

What’s Included

• Starlink Mini Magnetic Booster Base
• Integrated DC‑DC booster for 12V to 30V conversion
• Anderson connector and pre‑wired power leads
• Mounting hardware (Inc 4x Magnetic Feet and hardware)

Starlink Mini dish is not included.

Installation and important notes

1. Place the mount on a clean, flat magnetic steel surface with all four magnets fully contacting the mounting surface.

2. Connect power supply from 30v booster module to Starlink Mini dish and insert into mount.

3. Slide Section B into position until Starlink Mini dish is firm and secure, Tighten screws.

4. Before driving, check that the mount and Starlink Mini are fully fitted and secure.

• This mount must be installed on a clean, flat, magnetic steel surface. Do not use it on curved, uneven, thin, damaged, dirty or non-magnetic surfaces.

• It is not suitable for aluminium, fibreglass, plastic, glass or other non-ferrous materials.

• The mount has been tested at highway speeds when correctly installed on a suitable clean flat surface, with all four magnets making full contact and both locking brackets fitted.

• Check the installation before every journey and after travelling on corrugated or rough roads.

• Clean and dry the vehicle surface and magnet faces before installation to maximise magnetic holding strength and help prevent paint damage.

• The customer is responsible for ensuring their vehicle, mounting surface and intended use are suitable before driving.

• Every vehicle is different. By purchasing this mount, you confirm you have read the installation guide and accept responsibility for fitting it securely and using it safely.