Starlink Mini Magnetic Roof Mount

Starlink Mini Magnetic Roof Mount

Securely mount your Starlink Mini to a compatible steel vehicle roof, canopy, or other flat magnetic surface—without drilling holes.

Designed for 4WD touring, caravans, campers and remote-work setups, this magnetic roof mount provides a simple, removable way to position your Starlink Mini above ground-level obstructions for a clearer view of the sky. Install it in seconds, remove it when you are ready to move, and avoid permanent modifications to your vehicle.

The aluminium base uses four powerful N42 66 mm magnets to hold securely to suitable flat ferrous-metal surfaces. Stainless-steel fixings, a 2.5 mm clear acrylic cover, two locking brackets and an optional grab handle complete a neat, durable and low-profile Starlink Mini setup.

Features

• Purpose-built for Starlink Mini.

• No-drill magnetic installation.

• Four N42 66 mm magnets for a strong hold.

• Aluminium mounting base with stainless-steel fixings.

• Includes a 2.5 mm clear acrylic protective cover.

• Includes two locking brackets to secure the clear cover and Starlink Mini in place.

• Includes an optional grab handle for easier handling and removal.

• Fast to install, remove and move between compatible vehicles.

• Ideal for 4WDs, caravans, motorhomes, campers and remote-work setups.

• Tested at vehicle speeds up to 130 km/h.

Specifications

What’s included

• 1 × Aluminium magnetic mount base

• 4 × N42 66 mm magnets

• Stainless-steel mounting fixings

• 1 × 2.5 mm clear acrylic protective cover

• 2 × Locking brackets

• 1 × Optional grab handle

Starlink Mini dish, cable and power equipment are not included.

Installation and important notes

1. Place the mount on a clean, flat magnetic steel surface with all four magnets fully contacting the mounting surface.

2. If using the included grab handle, install the optional grab handle before fitting the Starlink Mini.

3. Fit the Starlink Mini into the mount.

4. Position the 2.5 mm clear acrylic cover over the Starlink Mini.

5. Install the two locking brackets last, over the top of the acrylic cover. The locking brackets secure both the clear cover and the Starlink Mini dish in the mount.

6. Before driving, check that the mount, Starlink Mini, acrylic cover and both locking brackets are fully fitted and secure.

• This mount must be installed on a clean, flat, magnetic steel surface. Do not use it on curved, uneven, thin, damaged, dirty or non-magnetic surfaces.

• It is not suitable for aluminium, fibreglass, plastic, glass or other non-ferrous materials.

• The mount has been tested at highway speeds when correctly installed on a suitable clean flat surface, with all four magnets making full contact and both locking brackets fitted.

• Check the installation before every journey and after travelling on corrugated or rough roads.

• Clean and dry the vehicle surface and magnet faces before installation to maximise magnetic holding strength and help prevent paint damage.

• The customer is responsible for ensuring their vehicle, mounting surface and intended use are suitable before driving.

• Every vehicle is different. By purchasing this mount, you confirm you have read the installation guide and accept responsibility for fitting it securely and using it safely.